LCD Problem Solving

LCD Problem will be possible overcome with attention of the following:

If LCD is flame

LCD problem caused by exposed to collision of fall. But the condition phones is normal, phones still can receives call. Usually socket / connector of lcd is not plugged into the machine properly or loose. The solution by unloading casing and lcd properly attach the socket, if you still want to try to replace the lcd to normaly, if you do not have any friends to borrow a lcd, then plug your lcd on normal phone's friend. Well if your phone still flame and lcd of phone's friend is well, It can be sure that your phone cpu have problem, well ... Just take it to a technician.

LCD is striped

Usually stripped LCD caused bay too hot or frequently used to play games or browsing and use of bluetooth or gprs. Generally, the line appears little by little corner up or down. To cope with ever try to open the casing. on lcd existing press lines using the thumb (nail) and slide laterally (side edge of the lcd) do continue until the line is lost.

LCD is blank

Problems on lcd blank could be caused by the hardware and can also be caused by the software.

 1. characteristics of white blank because by the software when mobile phone switched on, does not show welcome message tones, mobile phones can not turn off unless unplug battery directly. How to repair it, the flashing / on software reset. 

2. characteristics of white blank because the hardware when lit up the tone a welcome note, mobile telephone can be off right from the on / off. How to fix , make sure the LCD conditions is normal, check lcd conector when using lcd conector , check the voltage on the working condition lcd VIO & VFLASH, when the second voltage is mean symptom is caused by his EMIF ic lcd problematic.